Scientists at Kaist have developed a textile-based wearable display module technology that is washable and does not require an external power source, overcoming the problem in smart clothing with regard to its power sources and moisture permeability, which causes the devices to malfunction. The research has been published in Energy and Environmental Science.
To ease out the problem of external power sources and enhance the practicability of wearable displays, Professor Kyung Cheol Choi from the School of Electrical Engineering and his team fabricated their wearing display modules on real textiles that integrated polymer solar cells (PSCs) with organic light emitting diodes (OLEDs).Scientists at Kaist have developed a textile-based wearable display module technology that is washable and does not require an external power source, overcoming the problem in smart clothing with regard to its power sources and moisture permeability, which causes the devices to malfunction. The research has been published in Energy and Environmental Science.#
PSCs have been one of the most promising candidates for a next-generation power source, especially for wearable and optoelectronic applications because they can provide stable power without an external power source, while OLEDs can be driven with milliwatts. However, the problem was that they are both very vulnerable to external moisture and oxygen. The encapsulation barrier is essential for their reliability. The conventional encapsulation barrier is sufficient for normal environments; however, it loses its characteristics in aqueous environments, such as water. It limits the commercialisation of wearing displays that must operate even on rainy days or after washing.
To tackle this issue, the team employed a washable encapsulation barrier that can protect the device without losing its characteristics after washing through atomic layer deposition (ALD) and spin coating. With this encapsulation technology, the team confirmed that textile-based wearing display modules including PSCs, OLEDs, and the proposed encapsulation barrier exhibited little change in characteristics even after 20 washings with 10-minute cycles. Moreover, the encapsulated device operated stably with a low curvature radius of 3mm and boasted high reliability.
Finally, it exhibited no deterioration in properties over 30 days even after being subjected to both bending stress and washing. Since it uses a less stressful textile, compared to conventional wearable electronic devices that use traditional plastic substrates, this technology can accelerate the commercialisation of wearing electronic devices. Importantly, this wearable electronic device in daily life can save energy through a self-powered system.
Choi said, “I could say that this research realised a truly washable wearable electronic module in the sense that it uses daily wearable textiles instead of the plastic used in conventional wearable electronic devices. Saving energy with PSCs, it can be self-powered, using nature-friendly solar energy, and washed. I believe that it has paved the way for a ‘true-meaning wearable display’ that can be formed on textile, beyond the attachable form of wearable technology.”
This research has been carried out in collaboration with Professor Seok Ho Cho from Chonnam National University and led by Eun Gyo Jeong. (SV)
Fibre2Fashion News Desk – India
News
Articles
Interviews
Webinars
Events
Advertise with us
About Us
Contact Us
Privacy Policy
Terms & Conditions
Cookie Policy
