SABIC composites used to make first 3D-printed vehicle
September 12, 2014 - United States Of America
Saudi Basic Industries Corporation (SABIC) among the world’s top petrochemical companies and also a producer of advanced thermoplastics said its carbon fiber-reinforced material has been used to produce the world’s first 3D-printed vehicle at IMTS 2014.
SABIC delivered the innovative materials and processing expertise needed to create a first-of-its-kind concept vehicle using advanced 3D printing also known as additive manufacturing during the International Manufacturing Technology Show (IMTS) in Chicago.
This fully functional vehicle being printed from scratch and assembled by automotive design firm Local Motors, is expected to be driven off the tradeshow floor this weekend.
The concept vehicle emerged from a Local Motor’s Design Challenge which resulted in the submission of over 200 entries from more than 30 countries. The winning concept, Strati, inspired the full sized 3D-printed prototype.
“This ground breaking event showcases a long-awaited solution to a major manufacturing challenge on how to avoid significant investments in tooling and time necessary to produce large free form designs”, SABIC said.
Local Motors collaborated with Cincinnati Inc, a large-scale manufacturing system builder and Oak Ridge National Laboratory (ORNL), a pioneer in advanced materials research to develop and validate the technology and materials needed to deliver large format 3D printing technology.
“When the team was choosing our partners to produce the world’s first 3D-printed car, SABIC was an obvious choice because they would quickly and reliably deliver the proper materials needed to bring the Strati to life,” said John Rogers, CEO at Local Motors.
SABIC’s LNP STAT-KON carbon fiber-reinforced compound was chosen for its excellent strength-to-weight ratio and high stiffness, which minimizes warping during the 3D printing process, enabling enhanced aesthetics and performance.
Additionally, SABIC’s expertise in this emerging technology, including material selection and validation, equipment specification and processing, were instrumental throughout the development process.
“Involving SABIC at the inception, with their experience in advanced processing technology and material validation, was critical to the project’s success,” said Andrew Jamison, CEO at Cincinnati.
“Visitors will get a first-hand look at the future of additive manufacturing and its possibilities to transform the industry with our Big Area Additive Manufacturing (BAAM) machine running SABIC material and printing polymer components 200-500 times faster and 10 times larger than today’s additive manufacturing machines”, he added.
Tony Cerruti, Marketing Director, Americas, for SABIC’s Innovative Plastics business said, “We believe that this technology has far-reaching potential for applications across the multiple industries that SABIC serves, bringing designs to market faster and enabling mass customization.” (AR)
SABIC delivered the innovative materials and processing expertise needed to create a first-of-its-kind concept vehicle using advanced 3D printing also known as additive manufacturing during the International Manufacturing Technology Show (IMTS) in Chicago.
This fully functional vehicle being printed from scratch and assembled by automotive design firm Local Motors, is expected to be driven off the tradeshow floor this weekend.
The concept vehicle emerged from a Local Motor’s Design Challenge which resulted in the submission of over 200 entries from more than 30 countries. The winning concept, Strati, inspired the full sized 3D-printed prototype.
“This ground breaking event showcases a long-awaited solution to a major manufacturing challenge on how to avoid significant investments in tooling and time necessary to produce large free form designs”, SABIC said.
Local Motors collaborated with Cincinnati Inc, a large-scale manufacturing system builder and Oak Ridge National Laboratory (ORNL), a pioneer in advanced materials research to develop and validate the technology and materials needed to deliver large format 3D printing technology.
“When the team was choosing our partners to produce the world’s first 3D-printed car, SABIC was an obvious choice because they would quickly and reliably deliver the proper materials needed to bring the Strati to life,” said John Rogers, CEO at Local Motors.
SABIC’s LNP STAT-KON carbon fiber-reinforced compound was chosen for its excellent strength-to-weight ratio and high stiffness, which minimizes warping during the 3D printing process, enabling enhanced aesthetics and performance.
Additionally, SABIC’s expertise in this emerging technology, including material selection and validation, equipment specification and processing, were instrumental throughout the development process.
“Involving SABIC at the inception, with their experience in advanced processing technology and material validation, was critical to the project’s success,” said Andrew Jamison, CEO at Cincinnati.
“Visitors will get a first-hand look at the future of additive manufacturing and its possibilities to transform the industry with our Big Area Additive Manufacturing (BAAM) machine running SABIC material and printing polymer components 200-500 times faster and 10 times larger than today’s additive manufacturing machines”, he added.
Tony Cerruti, Marketing Director, Americas, for SABIC’s Innovative Plastics business said, “We believe that this technology has far-reaching potential for applications across the multiple industries that SABIC serves, bringing designs to market faster and enabling mass customization.” (AR)