Vartega, CCIA set up AMIDE Alliance
August 02, 2018 - United States Of America
Vartega and the Colorado Cleantech Industries Association (CCIA) have established the Advanced Materials and Additive Manufacturing Infrastructure Development and Education (AMIDE) Alliance. It will close a significant gap in the materials supply chain in Colorado by providing critical resources for developing thermoplastics for additive manufacturing.
The alliance was formed by a group of industry and academic partners as the result of a $500k Advanced Industries Accelerator (AIA) Collaborative Infrastructure Grant award from the Colorado Office of Economic Development and International Trade (OEDIT).
The AIA grant funding will support the creation of at least three innovation centres in Colorado focused on the development and application of fiber-reinforced thermoplastics and additive manufacturing materials. The centres will house equipment critical to the maturation of new additive manufacturing technologies and materials as well as programmes that train and educate new generations of professionals, students and technicians.
“This was an extremely competitive grant cycle, but the review committee and the Economic Development Commission recognised the value that Vartega, CCIA, and the other project partners could bring to the state through this investment in an advanced materials and additive manufacturing ecosystem,” said Katie Woslager, senior manager, Advanced Industries, State of Colorado Office of Economic Development and International Trade.
The founding partners of the alliance include Vartega, CCIA, Colorado State University, EWI and The 3D Printing Store. Additional support for the grant proposal and the AMIDE Alliance comes from the American Composites Manufacturers Association (ACMA), Arkema, Autodesk, Colorado School of Mines, the Composite and Nanocomposite Advanced Manufacturing Centre (CNAM), Draper, Front Range Community College, the Institute for Advanced Composites Manufacturing Innovation (IACMI), Johns Manville, Lulzbot, Michelman, Rocky Mountain SAMPE, StudioWest Concepts and Universal Plastics.
Support also comes from Colorado manufacturers AMP Industrial, the Crestridge Group, Oribi Manufacturing and Steelhead Composites, which already have new products in development using advanced materials and manufacturing methods, including 3D-printed and extruded carbon fibre thermoplastics. Alliance members will be represented by a seven-person governance board made up of industry and academic partners.
“There was so much great work happening in Colorado around the adoption and acceleration of 3D printing, but we kept running into the same problems sourcing and developing new materials and identifying local expertise for these applications,” said Vartega CEO Andrew Maxey. “As we recognised this gap in the supply chain and workforce, we were able to work with our customers and partners to put together a vision of what a vertically integrated supply chain would look like. We’re excited to be part of the newly formed AMIDE Alliance to close this gap and increase innovation in this growing and important area of manufacturing.”
Vartega produces recycled carbon fibre from scrap material generated in aerospace, automotive, wind energy and sporting goods manufacturing. They combine their recycled carbon fibre with thermoplastics to make custom materials for use in 3D printer filament and injection molding for applications such as sporting goods, consumer products and car parts. Through its participation in the AMIDE Alliance, Vartega will make capital equipment investments to increase the production of custom thermoplastic formulations in Colorado.
Shelly Curtiss, CCIA executive director, noted, “Advanced materials and additive manufacturing are impacting just about every industry right now. We see a huge opportunity to leverage these new developments throughout the cleantech sector for the benefit of our members who are focused on renewables, energy efficiency, clean water, oil and gas, mining and transportation.” CCIA will serve a critical role in overseeing the establishment of the AMIDE Alliance board and administrating the grant funds for the innovation centres.
The aim of the AMIDE Alliance is to create an ecosystem for materials development and testing through investment in equipment and resources. This ecosystem will enable accelerated development of advanced materials for additive manufacturing and training for the next generation of skilled workers in the new manufacturing economy. These goals will be accomplished through the creation of innovation centers in collaboration with Colorado State University, Colorado School of Mines and Vartega.
The Colorado State University centre will be located at the Composite Materials, Manufacture and Structures Laboratory (CMMS), where a six-axis robotic system will be installed for direct manufacture of continuous fibre-reinforced thermoplastic composites. The Colorado School of Mines centre will be located in the Interdisciplinary Advanced Manufacturing Teaching Lab. This centre will house a Hewlett Packard Jet Fusion 580 3D Printer for evaluation and characterisation of fibre-reinforced polymer powders being developed by project partners. The third innovation centrr will be located at an industry partner facility and will include extrusion equipment for the development of fibre-reinforced thermoplastics for 3D printing applications. (SV)
The alliance was formed by a group of industry and academic partners as the result of a $500k Advanced Industries Accelerator (AIA) Collaborative Infrastructure Grant award from the Colorado Office of Economic Development and International Trade (OEDIT).
The AIA grant funding will support the creation of at least three innovation centres in Colorado focused on the development and application of fiber-reinforced thermoplastics and additive manufacturing materials. The centres will house equipment critical to the maturation of new additive manufacturing technologies and materials as well as programmes that train and educate new generations of professionals, students and technicians.
“This was an extremely competitive grant cycle, but the review committee and the Economic Development Commission recognised the value that Vartega, CCIA, and the other project partners could bring to the state through this investment in an advanced materials and additive manufacturing ecosystem,” said Katie Woslager, senior manager, Advanced Industries, State of Colorado Office of Economic Development and International Trade.
The founding partners of the alliance include Vartega, CCIA, Colorado State University, EWI and The 3D Printing Store. Additional support for the grant proposal and the AMIDE Alliance comes from the American Composites Manufacturers Association (ACMA), Arkema, Autodesk, Colorado School of Mines, the Composite and Nanocomposite Advanced Manufacturing Centre (CNAM), Draper, Front Range Community College, the Institute for Advanced Composites Manufacturing Innovation (IACMI), Johns Manville, Lulzbot, Michelman, Rocky Mountain SAMPE, StudioWest Concepts and Universal Plastics.
Support also comes from Colorado manufacturers AMP Industrial, the Crestridge Group, Oribi Manufacturing and Steelhead Composites, which already have new products in development using advanced materials and manufacturing methods, including 3D-printed and extruded carbon fibre thermoplastics. Alliance members will be represented by a seven-person governance board made up of industry and academic partners.
“There was so much great work happening in Colorado around the adoption and acceleration of 3D printing, but we kept running into the same problems sourcing and developing new materials and identifying local expertise for these applications,” said Vartega CEO Andrew Maxey. “As we recognised this gap in the supply chain and workforce, we were able to work with our customers and partners to put together a vision of what a vertically integrated supply chain would look like. We’re excited to be part of the newly formed AMIDE Alliance to close this gap and increase innovation in this growing and important area of manufacturing.”
Vartega produces recycled carbon fibre from scrap material generated in aerospace, automotive, wind energy and sporting goods manufacturing. They combine their recycled carbon fibre with thermoplastics to make custom materials for use in 3D printer filament and injection molding for applications such as sporting goods, consumer products and car parts. Through its participation in the AMIDE Alliance, Vartega will make capital equipment investments to increase the production of custom thermoplastic formulations in Colorado.
Shelly Curtiss, CCIA executive director, noted, “Advanced materials and additive manufacturing are impacting just about every industry right now. We see a huge opportunity to leverage these new developments throughout the cleantech sector for the benefit of our members who are focused on renewables, energy efficiency, clean water, oil and gas, mining and transportation.” CCIA will serve a critical role in overseeing the establishment of the AMIDE Alliance board and administrating the grant funds for the innovation centres.
The aim of the AMIDE Alliance is to create an ecosystem for materials development and testing through investment in equipment and resources. This ecosystem will enable accelerated development of advanced materials for additive manufacturing and training for the next generation of skilled workers in the new manufacturing economy. These goals will be accomplished through the creation of innovation centers in collaboration with Colorado State University, Colorado School of Mines and Vartega.
The Colorado State University centre will be located at the Composite Materials, Manufacture and Structures Laboratory (CMMS), where a six-axis robotic system will be installed for direct manufacture of continuous fibre-reinforced thermoplastic composites. The Colorado School of Mines centre will be located in the Interdisciplinary Advanced Manufacturing Teaching Lab. This centre will house a Hewlett Packard Jet Fusion 580 3D Printer for evaluation and characterisation of fibre-reinforced polymer powders being developed by project partners. The third innovation centrr will be located at an industry partner facility and will include extrusion equipment for the development of fibre-reinforced thermoplastics for 3D printing applications. (SV)